CNC TURNING CENTERS: HAAS SL-30 CNC LATHE, HAAS CNC, 17 SW, 34 CENTERS, GEARBOX, EXCELLENT, 2006 (4460)

HAAS SL-30 CNC LATHE, HAAS CNC, 17 SW, 34 CENTERS, GEARBOX, EXCELLENT, 2006 (4460)

Stock Number: 4460

CNC TURNING CENTERS: HAAS SL-30 CNC LATHE, HAAS CNC, 17 SW, 34 CENTERS, GEARBOX, EXCELLENT, 2006 (4460), Click to view larger photo...       CNC TURNING CENTERS: HAAS SL-30 CNC LATHE, HAAS CNC, 17 SW, 34 CENTERS, GEARBOX, EXCELLENT, 2006 (4460), Click to view larger photo...       CNC TURNING CENTERS: HAAS SL-30 CNC LATHE, HAAS CNC, 17 SW, 34 CENTERS, GEARBOX, EXCELLENT, 2006 (4460), Click to view larger photo...       CNC TURNING CENTERS: HAAS SL-30 CNC LATHE, HAAS CNC, 17 SW, 34 CENTERS, GEARBOX, EXCELLENT, 2006 (4460), Click to view larger photo...       CNC TURNING CENTERS: HAAS SL-30 CNC LATHE, HAAS CNC, 17 SW, 34 CENTERS, GEARBOX, EXCELLENT, 2006 (4460), Click to view larger photo...       CNC TURNING CENTERS: HAAS SL-30 CNC LATHE, HAAS CNC, 17 SW, 34 CENTERS, GEARBOX, EXCELLENT, 2006 (4460), Click to view larger photo...       CNC TURNING CENTERS: HAAS SL-30 CNC LATHE, HAAS CNC, 17 SW, 34 CENTERS, GEARBOX, EXCELLENT, 2006 (4460), Click to view larger photo...       CNC TURNING CENTERS: HAAS SL-30 CNC LATHE, HAAS CNC, 17 SW, 34 CENTERS, GEARBOX, EXCELLENT, 2006 (4460), Click to view larger photo...      
Click to view larger photo

Request A Quote On Our Stock Number: 4460 CNC TURNING CENTERS: HAAS SL-30 CNC LATHE, HAAS CNC, 17 SW, 34 CENTERS, GEARBOX, EXCELLENT, 2006 (4460)Request a quote on stock# 4460
SpecificationDescription
APPROXIMATE AGE2006
MAXIMUM SWING OVER FRONT APRON30"
SWING OVER CROSS SLIDE14.5"
MAXIMUM TURNING DIAMETER17"
MAXIMUM TURNING LENGTH34"
X AXIS TRAVEL11.3"
Z AXIS TRAVEL34"
RAPID TRAVERSE RATE X & Z AXES710 IPM
SPINDLE BORE3.0"
MAXIMUM BAR CAPACITY2.56"
SPINDLE SPEEDS3,400 RPM
SPINDLE MOTOR (TWO SPEED GEARBOX)30 HP
TURRET CAPACITY12 STATION TURRET
DIMENSIONS, APPROX.147" x 73" x 74"
WEIGHT, APPROX.16,000 LBS

Equipped With:
HAAS TRIPLE HIGH-SPEED 32-BIT CNC CTRL W/15" LCD,
RS-232C PORT INTERFACE FOR DNC OPERATION,
10" 3-JAW THROUGH HOLE CHUCK WITH JAWS,
HAAS BOLT ON TURRET, 1 MEG MEMORY UPGRADE,
RIGID TAPPING (SYNCHRONOUS / SOLID TAPPING),
FLOPPY DISC DRIVE, ALL AVAILABLE MANUALS & TOOLING
*** LESS THAN 1,000 SPINDLE HOURS ***
****EXCELLENT - LIKE NEW! ****


HomeIndexContact


CNC TURNING CENTERS: HAAS SL-30 CNC LATHE, HAAS CNC, 17 SW, 34 CENTERS, GEARBOX, EXCELLENT, 2006 (4460)
Midwest Machinery, Inc.
21303 Omega Circle
Franksville, WI 53126
262-895-3462
262-895-3463
[email protected]



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com